go home
COMPANY PRODUCTS PROJECT SERVICES EQUIPMENT CONTACT US
Brass
Copper
Copper Tubes
Air Conditioning Tubes
LWC & PCC
Pre-lagged Copper Tubes
Insulated Tubes
Hexagonal / Octagonal Tubes
Square / Rectangular Tubes
Finned Tubes
Copper-Alloy Tubes
Sheet / Plate
Round Bar / Square Bar / Flat Bar
Stainless Steel
Carbon Steel
Aluminum
Specialty Metals
Gilsonite
ASTM B88
WATER, GAS & SANITATION USAGE
Nominal O.D Actual O.D Wall Thickness (mm) Weight (Kg/m)
(Inches) (Inches) (mm) K L M K L M
1/4 3/8 9.53 0.89 0.76 - 0.216 0.187 -
3/8 1/2 12.70 1.24 0.89 0.64 0.399 0.295 0.217
1/2 5/8 15.88 1.24 1.02 0.71 0.510 0.426 0.302
5/8 3/4 19.05 1.24 1.07 - 0.620 0.540 -
3/4 7/8 22.22 1.65 1.14 0.81 0.953 0.675 0.487
1 1 1/8 28.58 1.65 1.27 0.89 1.25 0.974 0.692
1 1/4 1 3/8 34.92 1.65 1.40 1.07 1.54 1.32 1.02
1 1/2 1 5/8 41.28 1.83 1.52 1.24 2.03 1.70 1.39
2 2 1/8 53.98 2.11 1.78 1.47 3.07 2.61 2.17
2 1/2 2 5/8 66.68 2.41 2.03 1.65 4.35 3.69 3.01
3 3 1/8 79.38 2.77 2.29 1.83 5.96 4.96 3.99
3 1/2 3 5/8 92.08 3.05 2.54 2.11 7.63 6.38 5.33
4 4 1/8 104.78 3.40 2.79 2.41 9.68 7.99 6.93
5 5 1/8 130.18 4.06 3.18 2.77 14.40 11.30 9.91
6 6 1/8 155.58 4.88 3.56 3.10 20.70 15.20 13.30
8 8 1/8 206.38 6.88 5.08 4.32 38.60 28.70 24.50
10 10 1/8 257.18 8.59 6.35 5.38 59.97 44.72 38.90
Note
1. Chemical composition complying with UNS C12200
(Copper:99.9%(min), Phosphoorus:0.015%(min)~0.040%(max))
2. Length:Available with 19ft(5.8m), 19.8ft(6.0m) and 20ft(6.096m)
DWV
DRAINAGE COPPER TUBES
Nominal Size OD (mm) WT (mm) Weight (kg/m) Tolerance (mm)
(A) (B) OD THK
32 1 1/4 34.92 1.02 0.967 0.038 0.076
40 1 1/2 41.28 1.07 1.20 0.051 0.076
50 2 53.98 1.07 1.59 0.051 0.100
80 3 79.38 1.14 2.51 0.051 0.100
100 4 104.78 1.47 4.27 0.051 0.180
125 5 130.18 1.83 6.59 0.051 0.200
150 6 155.58 2.11 9.08 0.051 0.200
200 8 206.38 2.77 15.8 0.100 0.280
ASTM B 306 (Copper Drainage Tubes)
CHEMICAL COMPOSITION
Component Min. Max.
Copper % 99.9 -
Phosphorus % 0.015 0.04
All items are produced as DHP based on C12200 standard
MECHANICAL PROPERTIES
Type Temper Tensile Stength, min
ksi Mpa
Straight Tube Hard 40 275
AS 1432
TYPE A
Nominal size DN Mean outside diameter (mm) Ovality (mm) Thickness (mm)
Min. Max. Max. for straight lengths Min. at any point Nominal Min. at any point
Coils & LWP Straight lengths
6 6.25 6.27 6.35 0.04 0.77 0.91 1.05
8 7.84 7.86 7.94 0.06 0.77 0.91 1.05
10 9.42 9.44 9.52 0.08 0.88 1.02 1.17
15 12.57 12.62 12.70 0.10 0.88 1.02 1.17
18 15.72 15.80 15.88 0.16 1.04 1.22 1.40
20 18.85 18.97 19.05 0.20 1.21 1.42 1.63
25 25.09 25.30 25.40 0.28 1.39 1.63 1.88
32 31.37 31.65 31.75 0.38 1.39 1.63 1.88
40 37.64 38.00 38.10 0.48 1.39 1.63 1.88
50 - 50.67 50.80 0.64 1.39 1.63 1.88
65 - 63.35 63.50 0.88 1.39 1.63 1.88
80 - 76.02 76.20 1.08 1.73 2.03 2.33
90 - 88.70 88.90 1.24 1.73 2.03 2.33
100 - 101.35 101.60 1.42 1.83 2.03 2.33
125 - 126.75 127.00 1.78 1.83 2.03 2.33
150 - 152.10 152.40 2.12 2.38 2.64 2.90
200 - 202.80 203.20 2.84 3.24 2.64 3.04
TYPE B
Nominal size DN Mean outside diameter (mm) Ovality (mm) Thickness (mm)
Min. Max. Max. for straight lengths Min. at any point Nominal Min. at any point
Coils & LWP Straight lengths
6 6.25 6.27 6.35 0.04 0.60 0.71 0.82
8 7.84 7.86 7.94 0.06 0.60 0.71 0.82
10 9.42 9.44 9.52 0.08 0.77 0.91 1.05
15 12.57 12.62 12.70 0.10 0.77 0.91 1.05
18 15.72 15.80 15.88 0.16 0.88 1.02 1.17
20 18.85 18.97 19.05 0.20 0.88 1.02 1.17
25 25.09 25.30 25.40 0.28 1.04 1.22 1.40
32 31.37 31.65 31.75 0.38 1.04 1.22 1.40
40 37.64 38.00 38.10 0.48 1.04 1.22 1.40
50 - 50.67 50.80 0.64 1.04 1.22 1.40
65 - 63.35 63.50 0.88 1.04 1.22 1.40
80 - 76.02 76.20 1.08 1.39 1.63 1.88
90 - 88.70 88.90 1.24 1.39 1.63 1.88
100 - 101.35 101.60 1.42 1.47 1.63 1.79
125 - 126.75 127.00 1.78 1.47 1.63 1.79
150 - 152.10 152.40 2.12 1.83 2.03 2.23
200 - 202.80 203.20 2.84 1.87 2.03 2.28
TYPE C
Nominal size DN Mean outside diameter (mm) Ovality (mm) Thickness (mm)
Min. Max. Max. for straight
lengths
Min. at any point Nominal Min. at any point
Coils & LWP Straight lengths
10 9.42 9.44 9.52 0.08 0.60 0.71 0.82
15 12.57 12.62 12.70 0.10 0.60 0.71 0.82
18 15.72 15.80 15.88 0.16 0.77 0.91 1.05
20 18.85 18.97 19.05 0.20 0.77 0.91 1.05
25 25.09 25.30 25.40 0.28 0.77 0.91 1.05
TYPE D
Nominal size DN Mean outside diameter (mm) Ovality (mm) Thickness (mm)
Min. Max. Max. for straight lengths Min. at any point Nominal Min. at any point
Coils & LWP Straight lengths
32 - 31.65 31.75 0.38 0.77 0.91 1.05
40 - 38.00 38.10 0.48 0.77 0.91 1.05
50 - 50.67 50.80 0.64 0.77 0.91 1.05
65 - 63.35 63.50 0.88 0.77 0.91 1.05
80 - 76.02 76.20 1.08 1.04 1.22 1.40
90 - 88.70 88.90 1.24 1.04 1.22 1.40
100 - 101.35 101.60 1.42 1.09 1.22 1.35
125 - 126.75 127.00 1.78 1.27 1.42 1.57
150 - 152.10 152.40 2.12 1.47 1.63 1.79
TEMPER & FORM
Thickness Type Temper Size range DN Form
Minimum Maximum
A Hard 6 200  
BQ 15 20  
Annealed 6 40  
B Hard 6 200  
BQ 15 20  
Annealed 6 40  
C Hard 10 25  
BQ 15 20  
D Annealed 10 25  
Hard drawn 32 150  
LENGTH TOLERANCE
Form Specified length (m) Tolerance
Straight lengths ≤ 3 +12, -0 mm
>3, ≤ 6 +24, -0 mm
Coils ≤ 15 +300, -0 mm
>15 +2, -0 %
TUBE HARDNESS
Temper Hardness, HV
Min. Max.
Hard drawn 100 -
Bendable 80 100
Annealed - 70
CHEMICAL COMPOSITION
Composition Composition %
Min. Max.
Copper % 99.9 -
Phosphorus % 0.015 0.040
EN 1057
NOMINAL OUTSIDE DIAMETERS AND THICKNESS
Nominal outside Diameter Nominal wall thickness
d 0.50 0.60 0.70 0.80 0.90 1.00 1.10 1.20 1.50 2.00 2.50 3.00
6 x R   R   R            
8 x R   R   R            
10 x R R R   R            
12 x R x R   R            
14     x x   x            
15 x   R R   R   x x      
16       x   x   x        
18   x   R   R   x x      
22   x   x R R x R R      
25           x   x x      
28   x   x R R   R R      
35     x x   x x R   x    
40           x x          
42       x   x   R R x    
54       x x x   R R R    
64                 x R x  
66.7           x   R x x x  
70                   x x  
76.1                 R R x  
80           x       x    
88.9                   R x x
108                 R x R x
133                 R x   R
159                 x R   R
219                       R
267                       R
R : indicates the European recommended dimensions
x : indicates other European dimensions
TOLERANCES ON OUTSIDE DIAMETERS
Nominal outside Diameter d Tolerances on outside diameters
Applicable to mean Applicable to any diameter1)
Over Up to and Including All tempers R290 (hard) R250 (halfhard)
62) 18 ±0.04 ±0.04 ±0.09
8 28 ±0.05 ±0.06 ±0.10
28 54 ±0.06 ±0.07 ±0.11
54 76.1 ±0.07 ±0.10 ±0.15
76.1 88.9 ±0.07 ±0.15 ±0.20
88.9 108 ±0.07 ±0.20 ±0.30
108 159 ±0.2 ±0.7 ±0.40
159 267 ±0.6 ±1.5 -
1) Including devation from circular form
2) Including 6

Note : Tolerance for tubes in R220(annealed) temper are applicable only to mean diameter
TOLERANCES ON OUTSIDE DIAMETERS
Nominal outside Diameter dmm Tolerances on wall thickness e1)
e< 1mm e ≥ 1mm
108 159 ±102) ±13
159 267 ±10 ±15
1) Including devation from concentricity
2) ±10% for R250(halfhard) tubes of 35mm, 42mm and 54mm diametr with a wall thickness 1.2mm
Note : Concentricity(uniformity of wall thickness) is controlled by tolerance on wall thickness
CHEMICAL COMPOSITION
Composition Composition, Percent
Min. Max.
Copper 99.9 99.9
Phosphorus % 0.015 0.015
HOW
TO
ORDER